Falco Pest Control

Pest control costs in Texas typically range from $150 to $350 for a one-time treatment, depending on property size and pest type. Quarterly plans usually run $100–$200 per visit. Termite treatments and fumigation cost more, often $500–$2,500 depending on the severity and method used.

Common signs include droppings, gnaw marks, damaged wood, shed wings near windows, unusual odors, live or dead insects, nests or webs in corners, and scratching sounds in walls or attic. If you spot any of these, a professional inspection can identify the pest species and the extent of the problem.

Organic methods such as diatomaceous earth, essential oil repellents, and boric acid can be effective for certain pests. However, they often work more slowly and may not be sufficient for severe infestations. Many Texas companies offer green or low-toxicity options that balance effectiveness with environmental responsibility.

TPCL stands for Texas Pest Control License, issued by the Texas Department of Agriculture (TDA). It is required for any business performing structural pest control in Texas. The license must be renewed annually and requires proof of insurance, a certified applicator on staff, and compliance with TDA regulations.

An inactive license means the company has not renewed their TPCL with the Texas Department of Agriculture. This could be due to business closure, failure to meet insurance requirements, or voluntary non-renewal. Companies with inactive licenses cannot legally perform pest control services in Texas.

General pest control (Category P) covers common household pests including cockroaches, ants, spiders, silverfish, earwigs, crickets, centipedes, and occasional invaders. Some companies include mosquito and flea treatments in their general service, while others offer these as add-ons.

Texas has three main termite types: Eastern subterranean termites (most common, found statewide), Formosan subterranean termites (aggressive species in Southeast Texas and coastal areas), and drywood termites (found in attics and furniture, mainly in South and Coastal Texas). Each requires different treatment approaches.

Most professional lawn treatments are pet-safe once dry, usually within 1–2 hours. Granular products may require watering in and drying before allowing pet access. Let your technician know you have pets so they can select appropriate products and advise on re-entry timing.

Exclusion involves sealing entry points that animals use to enter your home — gaps in rooflines, soffit vents, foundation cracks, and pipe penetrations. Without exclusion, trapped or removed animals will be replaced by new ones. Professional exclusion is the most important part of a lasting wildlife solution.

Do not attempt to remove wasp nests yourself, especially paper wasp nests, yellow jacket ground nests, or large hornet nests. Wasps can sting repeatedly and attack in numbers when their nest is threatened. A licensed pest control professional can safely remove the nest and treat the area to discourage rebuilding.

Termites are found throughout Texas, but subterranean termites are especially active in the eastern and southern regions with higher moisture levels. The Gulf Coast and East Texas have the highest termite pressure, including aggressive Formosan termites. Regardless of location, annual inspections are recommended for all Texas homeowners.

Texas pest control is regulated by the Texas Department of Agriculture (TDA) under the Texas Structural Pest Control Act. All pest control businesses must hold a TPCL license, employ a certified applicator, maintain insurance, and follow specific rules for pesticide application, record keeping, and consumer protection.

Heat treatment involves raising the temperature of an infested area to 130–145°F using industrial heaters. It is the most effective treatment for bed bugs and can also treat drywood termites in localized areas. The high temperature kills all life stages including eggs. No chemicals are used, and rooms can typically be re-occupied the same day.